022-29398436
农林牧渔业、工矿企业、市政工程、水文水利、科研高校单位、房地产与建筑业等行业
Wtf2000-tn water quality analyzer is an on-line monitoring instrument for total nitrogen index of surface water and sewage. The instrument is based on the national standard or industry standard. It has the characteristics of simple operation, high degree of automation, easy maintenance and low cost of consumables. The instrument is equipped with RS485 / RS232 interface and supports Modbus protocol. It can comprehensively master its operation status and data through remote communication, and can also carry out remote control to realize remote analysis, remote calibration, remote monitoring and control Remote cleaning and other advanced functions. In addition, the instrument has its own dilution function, which can also meet the application requirements for high concentration samples. After a long time of feedback verification, the accuracy of the analysis and other indicators are better than the relevant national standards.
This product is suitable for: surface water, domestic sewage, industrial wastewater, etc.
·The main components are imported brands to ensure their accuracy, stability and reliability;
·Infrared measurement unit, quantitative accuracy;
·Three point automatic calibration, high linear correlation;
·Special LED light source, high signal-to-noise ratio;
·RS232 / RS485 interface, standard Modbus protocol, can remotely read the operation status and related data of the instrument;
Performance parameters of wtf2000-tn
Analysis method |
Alkaline potassium persulfate digestion UV spectrophotometry HJ 636-2012 |
|
Analysis range |
0.2-7.0mg/L; 0.2-70.0mg/l (customizable) |
|
detection limit |
0.05mg/L |
|
resolving power |
<0.02mg/L |
|
Error |
<10% F.S. |
|
Repeatability |
5% |
|
Span Drift |
±5% F.S. |
|
Digestion temperature |
120 ℃ (settable) |
|
Digestion time |
30Minutes (settable) |
|
Analysis method |
On the hour |
Run hourly, up to 24 groups per day |
|
Interval |
Run at set intervals |
|
Manual |
Manual analysis |
|
long-range |
Modbus is used for remote control;Dry contact control |
Calibration mode |
Interval times |
Interval calibration according to the number of analysis accumulation |
|
Interval days |
Interval calibration by operation days |
|
Manual |
Manual calibration |
|
long-range |
Remote control by MODBUS |
Cleaning method |
Automatic |
Analysis and cleaning;Fault cleaning;Abnormal power off cleaning;Emergency stop cleaning |
|
Manual |
Manual cleaning |
call the police |
Lack of liquid alarm;Self check alarm;Fault alarm;Over limit alarm (one way relay) |
|
Data |
One 4-20mA analog |
|
Communications |
A standard Modbus protocol of RS232 or RS485 interface |
|
Storage |
About 20000 sets (automatically saved after power failure);Support u disk to export Excel; |
|
Printing |
Miniature industrial thermal printer (optional) |
|
Reagent dosage |
About 650 times / set (3 months) |
|
Maintenance cycle |
About 30 days, 45 minutes |
|
Display unit |
7Inch LCD, 800 * 480 resolution, TFT true color touch screen |
|
Use environment |
5-35 ℃, humidity < 90% (no condensation) |
|
Water sample temperature |
5—35℃ |
|
Interference |
Hexavalent chromium ion, trivalent iron ion, iodine ion, bromine ion, carbonate and bicarbonate, sulfate and chloride |
|
Water extraction unit |
For the circulation and retention of water samples;Automatic back flushing precision filtration system (optional) |
|
Dimensions |
one thousand and five hundred×five hundred×400mm (including reagent cabinet) |
|
Weight |
45kg (including reagent cabinet) |
|
Power Supply |
AC 220V ± 10%, 50Hz ± 1% |
|
Power |
150W |
Green ring company provides you with:
1. Water quality monitoring technical consultation and formulation of application scheme
2. Customized supporting products according to the site environment
3. Debugging and acceptance of instruments and supporting equipment
4. On site training of instrument use methods and precautions
5. After sales maintenance and repair service
Green ring company can provide customized product services for customers to meet their on-site needs. The supporting products provided by Jingxiang company include:
one Data acquisition and transmission network: remote transmission of field data to the user terminal (server, PC terminal), to achieve remote monitoring, according to the communication protocol provided by the user Develop the data format and connect with the local relevant departments.
two Analysis data PC client: through the configured computer, the analysis data will be transmitted to the computer in real time, or connected with the outdoor LED electronic LCD screen.
three Water quality regulation dosing unit: according to the instrument analysis data, real-time regulation of supporting dosing equipment, inlet and outlet valves and other third-party equipment.
four Pump control unit: it provides the control service of pump equipment on site, and can realize manual / automatic operation.
five Water quality pretreatment unit: in view of the conditions of high temperature and high pollution of water samples, it is necessary to carry out physical purification or cooling treatment for water samples, so as to meet the requirements of analysis.
Some consumables and accessories |
||
name |
Company |
Recommended replacement cycle (6 times / day) |
Analytical reagent |
Set (1L) |
2Months |
Standard sample |
Set (1L) |
3Months |
Peristaltic pump pipe stuck |
root |
6Months |
Drain pipe |
root |
6Months |
Green ring promises that the reagent formula is fully open. Jingxiang provides analytical reagents and standard samples for customers to prepare.