♦   host

The microcomputer control processing unit is adopted:

      Storage and logical operation functions

♦   touch screen:

    Record data and files, save values and results, and store history

♦   Network functions:

    Communication with LAN, remote operation with 4G to view data

♦   24V DC power supply and power supply failure:

    Automatic saving of parameters, history and clock of 24V DC power supply and power failure               ♦   data collector:

    Data acquisition value of single chip

♦   Data output function:

    Ethernet (standard), USB serial port interface, RS232, RS485 (Modbus Communication Protocol)

♦   Signal status:

    Correct passive points, maintenance contacts, remote / local contacts, analysis start, analysis reset, analysis wait, analysis pause.

♦   Analog data output:

    Maximum load 600 ohm, 4-20mA (current blocking) provides two outputs

♦   Alarm function:

     Machine fault alarm and upper and lower limit alarm of data

♦   Environmental Science:

    Clean the room with relative humidity of 2% to 95% (without condensation),

    10 – 30 ° C +/- 4 ° C deviation (50 ° F – 86 ° F +/- 7.2 ° F (deviation)

♦   Shell:

      Protection grade IP65 (according to din40050)         Dimensions (600 W x 450 x 1500mm h)

      Shipment of 40kg, machine shell grounding device

♦   piping:

      Peristaltic pump, micro pump, diaphragm pump, injection pump, discharge, instrument air, discharge

♦   Cleaning correction:

    Demineralization purified water / distilled water for calibration, cleaning, dilution, etc