♦   host

Microcomputer control processing unit: storage and logic operation function

♦   touch screen:

    Record data and files, save values and results, store history

♦   Network function:

    It can communicate with local area network and connect with 4G to view data remotely

♦   24 V DC power supply and power failure:

    24 V DC power supply and power failure automatically save parameters, history and clock               ♦   data collector:

    Single chip data acquisition

♦   Data output function:

    Ethernet (standard), USB serial interface, RS232, RS485 (Modbus Communication Protocol)

♦   Signal status:

    Calibration passive point, maintenance contact, remote / local contact, analysis start, analysis reset, analysis wait, analysis pause.

♦   Analog data output:

    Maximum load 600 ohm, 4-20mA (current blocking) can provide two outputs

♦   Alarm function:

     Machine fault alarm and data upper and lower limit alarm

♦   Environmental Science:

    Relative humidity 2% - 95% (non condensing) clean the room,

    10 – 30 ° C +/- 4 ° C deviation (50 ° F – 86 ° F +/- 7.2 ° F (deviation)

♦   Shell:

      Protection grade IP65 (according to din40050)         Dimensions (W 600 x l 450 x H 1500mm)

      Shipment of 40kg, machine shell grounding device

♦   piping:

      Peristaltic pump, micro pump, diaphragm pump, injection pump, discharge, instrument air, discharge

♦   Cleaning correction:

    Demineralized purified / distilled water for calibration, cleaning, dilution, etc